Line laser ADA LaserTANK 4-360 GREEN Ultimate Edition

Article A00632
Line laser ADA LaserTANK 4-360 GREEN Ultimate Edition

Line laser ADA LaserTANK 4-360 GREEN Ultimate Edition

Article A00632

Specifications

Laser projection
2H (360°) / 2V (360°)
Working range with/without receiver
230/130 ft (70/40 m)
Accuracy
± 0,3 mm/m
Self-leveling range
±4°
Laser diode
class 2, 515 nm, < 1 mW
Dust/water protection
IP 54
Power supply
Li-ion battery 3.7 V /charger 5 V
Tripod thread
2x1/4"
Operating temperature
-10°C +50°C
Dimensions
132х123х100 mm
Weight (with batteries)
0,73 kg
Manual

Description

Professional line laser. ADA LaserTANK 4-360 GREEN Ultimate Edition – is a first professional ADA Instruments line laser that projects four 360° lines. Mutually perpendicular lines (two horizontal and two vertical) allow you to perform absolutely any markup. Ideal for construction or repair work both for interior and exterior application.

Upper and lower horizontal lines. Two horizontal lines is the main advantage of ADA LaserTANK 4-360 GREEN. Upper line is designed for mark under the ceiling, and the lower line for operation close to the floor. So the maximum accuracy is achieved – the closer the line to the surface, the more accurate is the mark. The lower horizontal line is useful for leveling the screed, laying various floor coverings.

Robust and protective housing. The housing of ADA LaserTANK 4-360 GREEN is protected from all sides by a thick layer of rubber. Inside, a cellular structure is used, which perfectly resists external influences, shocks during falls. The original design of the glass fencing protects them from destruction as much as possible.

Bright green beams. Green beam of the professional line laser ADA LaserTANK 4-360 GREEN is ideal for laser mark in bright light. Green laser line provides the best visibility in comparison with red beam under the same working conditions.

Convenient laser marking with vertical lines. Intersecting laser beams at a 90º from one another when switching on vertical lines. Very convenient when aligning walls and angles between walls. Laser lines can be turned off one-by-one, leaving only those that are necessary for the operation.

Convenient operating buttons. ADA LaserTANK 4-360 GREEN has user-friendly operating buttons. Due to that, it is convenient to operate the device.

Convenient mark with vertical lines. Vertical lines are intersected at a 90º angle. Very convenient when leveling walls and corners between walls. Laser lines can be turned off one by one, leaving only those that are necessary for operation.

Accurate self-leveling. Automatic self-leveling. ADA LaserTANK 4-360 GREEN is distinguished by its high accuracy – the error is just 0,3 mm/m.

Powerful Li-On battery. ADA LaserTANK 4-360 GREEN operates from Li-On battery with capacity 7800 mA. High capacity significantly increases continuous working time in comparison with regular line lasers. USB Type-C connector for charging battery.

Remote control. Switching on and off is provided both with buttons and the remote control. Failure of adjusted lines for marking is excluded. To save battery power, working lines can be turned off and on by a common button on the remote control. Memory mode saves the selected combination. Ergonomical pendulum switch has an original design that makes it easy to unlock it when working in gloves.

Attachment options. ADA LaserTANK 4-360 GREEN can be attached to a wall mount or a tripod with the help of the thread 1/4". One thread is located on the top of the tool, another one – on the bottom. The tool can be placed on the tripod or universal mount.

Tilt mode. In this mode, you can tilt the device to any angle. Just fix the pendulum and press the mode button. Laser beams will be projected with necessary inclination. Such function will be useful, for example, when installing a staircase railing, or marking stretch ceilings at an angle, for example, in an attic.

Detector mode. Use the detector mode when operating outside in bright light. Working range increases from 40 to 70m.

ADA BASE (MAGNETIC LIFT + WALL BRACKET) is an universal mount with micro lift for laser level mounting on any surfaces and height. It consists of two parts: ADA MAGNETIC LIFT (magnetic mount with micro lift for line lasers) and ADA WALL BRACKET (quick-release clamp with capture size up to 55 mm. for line lasers that are set on the MAGNETIC LIFT).

Telescopic tripod. Lightweight folding aluminum tripod with extendable column for setting line laser at a height from 35 to 110 cm. Due to the lifting part it is possible to adjust the height in the range of 25 cm. A tripod allows you to set the line laser at the desired height anywhere.

Durable plastic case. The case is reinforced with stiffening ribs and can easily withstand bumps, drops and various weight loads. Big clip locks are convenient for usage. Line laser and accessories are fixed in the special soft inner structure.
 

 

Includes

Line laser
Durable case
Li-On battery
Charger
USB type-C wire
Remote control
ADA MAGNETIC LIFT
ADA WALL BRACKET
Telescopic tripod
Laser target
Operating manual

Includes

Line laser
Durable case
Li-On battery
Charger
USB type-C wire
Remote control
ADA MAGNETIC LIFT
ADA WALL BRACKET
Telescopic tripod
Laser target
Operating manual